PUMPS

Python, the Power in Peristaltic Pumps!

Designed to meet the demanding requirements of chemical injection and dispensing applications.

Exceptional self-priming capabilities make the L30 Series Python an ideal choice for hard-to-handle chemicals such as sodium hypochlorite, hydrogen peroxide or viscous polymers.   Most industries have difficult pumping applications where care in handling the process or waste fluid is required.

Industries served: agriculture, brewing/beverage, ceramics, chemical, food, ink, paint, pigments, pharmaceuticals, printing, pulp and paper, wastewater.

Python Pump Features:

•   Rugged all stainless steel casing for demanding industrial and laboratory applications and environments.

•   Handles abrasive, corrosive or aggressive fluids with ease

•   Extensive chemical compatibility

•   Superior flow rate stability and metering accuracy  

•   Total fluid containment, pump head completely sealed, no cross-contamination

•   Great accuracy and repeatability

•   Continuous dry-running and self-priming capability

•   Metering dyes, sizing agents, retention aids, optical brightening agents, phosphoric acid, soda ash and sodium nitrate solutions; adding and transferring alum, latex, pulp chemicals, and acids and alkalis; pumping defoamer, recycling Composil, feeding polymer, re-circulating ink, and pumping titanium dioxide

•   Greater pump life and reliability

•   Smooth low-shear flow

•   The fastest changeover time - no pump clean down at all --- reversibility to speed changeover and eliminate waste

An extremely wide range of flow outputs can be obtained by simply changing the tubing size. One size pumphead accepts five standard tubing sizes. The spring-loaded pumphead rollers provide extended tubing life and automatically compensate for minor variations in pump tube wall thickness. The L30 Python Series pump system allows you to mount the controller on the wall...away from the harsh environment.
 

L30 FEATURES

•   Flows to 35 GPH, Pressures to 30 psi.
•   Rugged industrial drive uses standard 56C face motors.
•   Seal-less pumping technology.
•   Self-priming – suction lifts to 25 ft.
•   No check valves – few moving parts.
•   Various long life chemical resistant tubing options available.
•   Dry run capability.
•   Remote wall mount controller with backlit digital display & integral keypad in NEMA 4 enclosure.
•   User selectable manual or automatic control.
•   Automatic control via 0-10VDC, 4-20mA or RS485 inputs.
•   Integral pump run timer to monitor tubing life.

SPECIFICATIONS

•  MOTOR
  · 1/3 HP TEFC Inverter Duty.
  · Standard 56C Face mounting flange.
  · Explosion proof & washdown motors available.
•   CONTROLLER
  · Wall mount with backlit LCD display.
  · Integral 8 button keypad.
  · Selectable manual or automatic control via 0-10 VDC or 4-20 mA.
  · RS-485 serial communications.
  · Remote start/stop capabilities.
  · Speed output signal.
  · Pump run timer.
  · NEMA 4 enclosure.
  · 115 VAC input, 7A nominal.
•   MECHANICAL
  · Pump/gearbox/motor weight: 49 lbs.
  · Controller weight: 3 lbs.
  · Pump Finish: Stainless Steel
  · Color: Gray motor and gearbox Brushed metal pump
•   TUBING DESCRIPTIONS
  · FLOPRENETM - Thermoplastic elastomer
  · TYGON(1) - PVC based thermoplastic
  · MARPRENE(2) - Thermoplastic elastomer
  · SILICONE - Thermalset rubber
  1 Registered Trademark of Saint-Gobain Performance Plastics
  2 Registered Trademark of Watson Marlow Inc.

TUBING CAPACITY CHART

*Actual flow rates may vary